Electrolytic Superoxide Water Module

Water molecules are decomposed into hydrogen ions (H +) and superoxide ions (o -) due to the action of electric field. The dissociated o – generates O2 due to sharing electrons, and then O2 adsorbs free oxygen to form O3. A small amount of (H +) and (o -) existing in the river water containing trace CL in the tap water also form HClO. Therefore, the ozone and hypochlorous acid generated by the electrolyzed tap water have dual bactericidal effects. The module adopts – oxygenanode ™ The special coating electrode for ozone mainly has high ozone conversion efficiency, which effectively ensures the cleanness of the environment and human health.

The superoxide electrolytic water module – electrolytic water generation module produced by our company is used to generate O3 and HClO from low-voltage electrolytic water, which can produce excellent oxidation sterilization effect.

Scope of application

This product is suitable for sterilization and cleaning of the third pipeline, spray sterilization of ceramic cylinder body, air atomization, sterilization of object surface, etc. It is not recommended to directly disinfect and sterilize human skin.

Structure Information

This product adopts PC injection molding frosted surface shell, double wire ultrasonic welding and sealing, and internal packaging – oxygenanode ™ Series of coated electrodes for ozone analysis.

No	Name	Material	Eligibility criteria	Remarks	Diagram
1	Upper shell	PC	MSDS
2	Lower shell	PC	MSDS
3	Electrolytic sheet	Pt group Ti- substrate	SGS	** Optional
4	Insulating element	Silica gel	SGS
5	Conductive seal	Silica gel	SGS
6	Nut	SUS304	CE
7	Wire-harness	Cu
8	Sealant	AB epoxy	SGS

 

Size specification drawing of Available superoxide-electrolysis module

 

5.Superoxide Module Performance

5.1 Module General Performance

5.1.1Operating conditions：

1、Electrolytic medium：General municipal tap water TDS 50 ~ 250 PPM。

2、The water temperature range is： 5～40 ℃。

3、Operating voltage:DC12V,constant voltage operation。

4、Consumption current：0.2A～1A。

5、Service pressure：0.07～3.0kgf/cm²。

6、Water pressure resistance：3.0kgf/cm²，Block the outlet and apply pressure of 3.0kgf/cm2 for one minute without water leakage。

7、Flow rate of effluent：200 ～ 800 ml/min。

8、Storage temperature： Room temperature.

5.1.2 Performance indicators

1、Ozone concentration：0.3～1.5㎎/L（see report 1 for details）。

2、*Ozone level will change with control power supply, environment and water quality. Please refer to the following curve change information：

Sterilization rate： refer to the requirements of-2.1. 4.1 in Technical Specifications for Disinfection, 2002 edition.

5.2 Core Component Performance
1、Electrode mode：-OxygenAnode™ Special coated electrode for chlorine evolution.
2、Oxygen evolution potential：≦1.386V
3、Strengthening life：8～10h（GB-12176 requirement）
4、Actual life：240～300h
5、Commutation tolerance times of alternating cycle ≧20000cycles.
6、Reverse current tolerance time：≥60 hours.

5.3 Module Reliability Test:

1、Current breakdown test of products：voltage 2500V, holding for 5min, no breakdown.

2、Electrode insulation test:insulation resistance≧1MΩ.

3、Air tightness test：Test air pressure 0.3 MP, holding time 1min, pressure loss ≤200 Pa.

4、Adsorption capacity of calcium and magnesium ions on cathode：Current 2A, time 72H, Cathode electrode sheet weight gain≦3㎎

5、Drop test (package landing)：After packaging in the designated packaging box, a single time from 100 cm After high free fall, there is no damage to all parts and no functional abnormality.

6.0 OQC Identification

6.1 Product Appearance

1、The products are free from damage, deformity, serious deformation, stains, scratches or scratched burrs, water mist and other phenomena.

2、Whether the wiring harness is standardized and neat; And there is no foreign matter in the product.

3、No weak assembly, loose or lack of fasteners

4、There is no shortage or wrong assembly of components

6.2 Certificate of Performance Conformity

1、The quality inspection records of production links are all qualified

2、After 3 hours aging test, the product runs without abnormality

3、Quality certificate issued by quality inspection department

6.3 Packaging and Marking

Packaging method：Bubble bag is coated on each product; Separate packaging with a knife card

7.0 Precautions for Product Use

7.1 Drinking water with water supply source conforming to GB5749, and the inlet temperature is not higher than 50 ℃; Filter screen should be installed when entering water at the front end of the product to ensure that there are no sundries such as sand and gravel and iron filings in the water quality.

7.2  When in use, ensure that the module is supplied with water before being electrified, so as to avoid damaging the electrode sheet by anhydrous electrification (long-term anhydrous electrification may lead to damage to the electrode sheet and deformation of the shell, etc.)

7.3 It is not recommended to use it directly for disinfection and sterilization of human skin.